Toasty 2

Or too, as the case may be.

Earlier in the week I spent a little time burping the air out of the lines where ever I could. A little came out at each bleed valve, but not much.

Then I started playing with the fancy manifold that's now behind a base cabinet.

First, I reset the flow meters at the bottom to make sure that they were fully open.

Then I adjusted the balance valves at the top of the manifold. As it turns out, what are described as "dust caps" for the valves (blue caps) also adjust the balance valves. A couple of turns and...

The sound of water rushing...

And then...

Heat.

Now all the little piggies are happy!